Specifications
| Physical Characteristics | |
|---|---|
| Width | 5.5in |
| Height | 8.5in |
| Depth | 14.5in |
| Weight | 16.6lbs |
| Operating Mode | Continuous |
| Water Protection | IPX0 |
| Main Cable | 10A/250V; Jack IEC 320/C13 |
| Power Supply | 100–240V, 50/60Hz, 3.15A; Remote On/Off ‘SOFT OFF’ button on keypad deactivates lamp to save power and bulb life. Electronics remain in low power standby mode. |
| Fuse | T3.15A 250V |
| Keypad | Five button control |
| Liquid Light Guide | 5mm core x 2m (6.5ft) length 3mm core x 2m (6.5ft) length |
Lamp |
| Type | 200W metal halide |
| Output | Approximately 20W with 5mm core, 12W with 3mm core |
| 5-Position Filter Wheel | |
| Mode | Motorized operation |
| Contents | Attenuation screens, can accept heat tolerant excitation filters |
| Motorized Shutter | Approximately 250ms response time | Ambient Conditions for Operation |
| Temperature | 10° to 25°C (50° to 77°F) |
| Relative Humidity | 30% to 75% |
| Air Pressure | 700hPa to 1060hPa | Display and Safety Features |
| Display and Safety Features | Clear display of lamp time, filter wheel position |
| Automatic system diagnostics | |
| Resettable lamp counter with warnings | |
| Four line by 20 character display (dimmable) | |
| Safety interlocks, output light blocked in absence of light guide | |
| Overtemperature protection with software warnings and hardware shutdown | |
| Compliance | ETL and CE/CSA compliant | Serial Connection |
| Serial Control | Computer interface with provided or easily customized software via binary or ASCII commands. User adjusted contrast, volume, filter wheel position names. User controlled filter position. |
DOWNLOADS
