The C9100 series gather all expected features: high gain, high signal to noise ratio, resolution and speed, thanks to a new generation EM-CCD sensor in a proprietary permanently sealed vacuum chamber evacuated to 10 -8 Torr.
With on-chip multiplication technology of the EM-CCD sensor the signal is drastically boosted while readout noise value is kept below 1 electron r.m.s. at high gain mode. The gain factor of the C9100-02 is up to 2000 and this camera is able to grab 30 frames per second keeping 14 bit dynamic range and full resolution of 1000 x 1000 pixel. The C9100-02 supports sub-array and binning modes, which enable high frame rate,100 frames per second or higher.
The C9100-02 is recommended for all applications requiring high gain, speed, good resolution, high dynamics and signal to noise ratio.
Features
- High quantum efficiency
- High sensitivity with on-chip multiplication
- Electron multiplier gain max. 2000 times
- Easy handling and maintenance
- High resolution 1000 (H) x 1000 (V) pixel
- Lifetime warranty for the sensor assembly
Data Sheet | Technical Note | Brochure
Applications
- Intracellular ion imaging
- Intravital microscopy (Real time observation of circulating blood cells in living animals)
- Fast tracking of small particles
- Single molecule observation at the photon level
- High speed fluorescence cell tomography
Quick Links
Key Specifications
| Imaging device | Frame transfer CCD |
| Shutter | Electronic shutter |
| Horizontal number of pixels | 1000 |
| Vertical number of pixels | 1000 |
| Cell size - horizontal | 8 µm |
| Cell size - vertical | 8 µm |
| Effective Horizontal Size | 8 mm |
| Effective Vertical Size | 8 mm |
| Scan Mode 1 | min. gain |
| Scan Mode 2 | max. gain = 2000 |
| Pixel clock rate Scan Mode 1 | 35 MHz/pixel |
| Frame Rate Scan Mode 1 | 272.48 with binning fps |
| Read noise Scan Mode 1 | 10 e-r.m.s. |
| Read noise Scan Mode 2 | <1 e-r.m.s. |
| Full well capacity Scan Mode 1 | 70 e- |
| A/D converter Scan Mode 1 | 14 bit |
| A/D converter Scan Mode 2 | 14 |
| Cooling Method | Peltier, forced air cooling plus hermetic sealing |
| Cooling Temperature | -50 °C |
| Output type | Camera link |
| Exposure time min | 0.1 msec. |
| Exposure time max | 10 sec |
| External control | Camera link |
| Sub-array | yes |
| Binning | yes |
| External trigger | yes |
| Contrast Enhancement | No |
| Lens mount | C-mount |
| Line voltage | DC +12V |
| Power consumption | 60 VA |
Drawing
Click image to enlarge
|