MSI Chamber Models

Just one electric incubator for any kind of cell culture support. This chamber, with both base and lid heated, can accommodate any kind of cell culture support. Interchangeable adapters allow to use any kind of multiwell plate (6-12-24-48-96), 35 mm Petri-dishes and chamber slides. This model is designed to increase reproducibility and versatility thus improving experimental efficiency. It can be used both with Long Working Distance and oil-immersion objectives. Two holes on the chamber body, allows the insertion of perfusion tubings. Typical applications are time-lapse observations of more than one field of view. To fully benefit from the multi accommodation design, this chamber should be mounted on a microscope equipped with motorized focus and motorized XY stage. It fits any 160x110mm sized stage (i.e. Ludl BioPrecison and BioPoint, Marzhauser SCAN IM 120x100, Prior H107 and H117), A.S.I. stages and all mechanical flat stages. A dedicated stage insert to fit it into the Nikon TI-S-E motorised XY stage is also available, Dimensions: 159x110x18 mm.

This model of the Electric incubator, with both base and lid heated,has been especially designed to fit into the Prior NanoScan piezo stage. It allows to accomodate one 35mm Petri-dish or one chamber slide. It can be used both with Long Working Distance and oil-immersion objectives. Dimensions:

This water-jacket model has been especially designed for high-magnification microscopy. Thanks to the slim profile, it can be indeed used with high N.A. condensers, thus allowing to use the best optical condition necessary for 63x and 100x objectives. It can host two 35mm Petri dishes or one chamber or glass slide. It can be used both with Long Working Distance and oil-immersion objectives. The use of glass-bottom metal dishes is recommended to minimize heat sink phenomena while using oil-immersion objectives. Typical applications of this chamber are time-lapse observations of a single field of view with high magnification. It fits any Ludl/Marzhauser/Prior motorised stage, any rectangular 160x110 mm mechanical stages and all the flat stages. Little bridges allow insertion of perfusion tubes. They are placed on the top of the chamber to pre-heat the perfusion medium before it enters into the sample. It fits any 160x110mm sized stage (i.e. Ludl BioPrecison and BioPoint, Marzhauser SCAN IM 120x100, Prior H107 and H117) and all mechanical flat stages. A dedicated stage insert to fit it into the Nikon TI-S-E motorised XY stage is also available, For A.S.I. stages, please see the model "Universal for A.S.I. stage". Dimensions: 207x155x22 mm.

Just one incubator for any kind of cell culture support This chamber can accommodate any kind of cell culture support. Interchangeable adapters allow to use any kind of multiwell plate (6-12-24-48-96), 35 mm Petri-dishes and chamber slides. This model is designed to increase reproducibility and versatility thus improving experimental efficiency. It can be used both with Long Working Distance and oil-immersion objectives. Two holes on the chamber body, allows the insertion of perfusion tubings. Typical applications are time-lapse observations of more than one field of view. To fully benefit from the multi accommodation design, this chamber should be mounted on a microscope equipped with motorized focus and motorized XY stage. It fits any 160x110mm sized stage (i.e. Ludl BioPrecison and BioPoint, Marzhauser SCAN IM 120x100, Prior H107 and H117) and all mechanical flat stages. A dedicated stage insert to fit it into the Nikon TI-S-E motorised XY stage is also available, For A.S.I. stages, please see the model "Universal for A.S.I. stage". Dimensions: 159x142x31 mm.

This water-jacket chamber model has been especially designed to fit into A.S.I. XY stages, It is suitable at the same time for both high-magnification microscopy and multi-point experiments. It can accommodate any kind of cell culture support. Interchangeable adapters allow to use any kind of multiwell plate (6-12-24-48-96), 35 mm Petri-dishes and chamber slides. This model is designed to increase reproducibility and versatility thus improving experimental efficiency. It can be used both with Long Working Distance and oil-immersion objectives. Typical applications are time-lapse observations of more than one field of view. Dimensions: 159x142x20 mm.

Special design to accept ECIS Culturewares from Applied Biophysics (ECIS, or Electric Cell-substrate Impedance Sensing, is a novel electrical method to study, in real time, many of the activities of cells when grown in tissue culture. These include morphological changes, cell locomotion, and other behaviors directed by the cell's cytoskeleton). It can be used both with Long Working Distance and oil-immersion objectives. Typical applications are time-lapse observations of more than one field of view. It fits any 160x110mm sized stage (i.e. Ludl BioPrecison and BioPoint, Marzhauser SCAN IM 120x100, Prior H107 and H117) and all mechanical flat stages. A dedicated stage insert to fit it into the Nikon TI-S-E motorised XY stage is also available, Dimensions: 159x142x31 mm.

This chamber allows to host 6 or 9 sealed sample special dishes. It has no CO2 and Humidity regulation since the sample is tight sealed into special sealed dishes. This model is particularly suited for material science applications, in which temperature has to be changed, preventing solvent evaporation. Typical applications are product stability analysis, phase transitions, crystallization, etc.